This Hynix’s Fully Buffered DIMM is a high-bandwidth & large capacity channel solution that has a narrow host interface. Hynix’s FB-DIMM features novel architecture including the Advanced Memory Buffer thatisolates the DDR2 SDRAMs from the channel. This single component located in the front side center of each DIMM, acts as a repeater and buffer for all signals and commands which are exchanged between the host controller and the DDR2 SDRAMs including data in and output. The AMB communicates with the host controller and adjacent DIMMs on a system board using an industry standard Differential Point to Point Link Interface at 1.5V power. The AMB also allows buffering of memory traffic to support large memory capacities. All memory controlfor the DDR2 SDRAM devices resides in the host, including memory request initiation, timing, refresh, scrubbing, sparing, configuration access and power management. The AMB interface is responsible forhandling channel and memory requests to and from the local FBDIMM and for forwarding request to other FBDIMMs on the memory channel.
IMPORTANTE: Todo producto A PEDIDO es sujeto a disponibilidad en el proveedor. En caso que el mismo no lo tuviera o que haya sido discontinuado, se devolvera el 100% de la seña correspondiente al producto en cuestión.